RMP / Cleaning kits & accessories
Melt Pressure Cleaning Kits, Cables & Mounting Accessories
Choose cleaning tooling, inspection gauges, cables and blanking hardware by their exact interface and intended task. Preserve the mounting seat and diaphragm during maintenance.
Confirm before ordering
- Separate residue cleaning from cutting a new mounting bore; do not substitute one tool set for the other.
- Verify connector keying, contact functions, cable temperature and shield termination using the exact drawing.
- Blanking bolts, spacers and thermocouples need approved geometry and process ratings; a rupture device is a different component.
Pressure & mounting choices
Specify full scale in PSI or bar: 1,500 PSI ≈ 103.4 bar; 3,000 PSI ≈ 206.8 bar; 5,000 PSI ≈ 344.7 bar; 10,000 PSI ≈ 689.5 bar. Nominal 100 / 200 / 350 / 700 bar ranges are separate specifications.
Review 1/2″–20 UNF, M14 × 1.5, M18 × 1.5 or M22 × 1.5 against the full bore drawing. The thread alone does not define compatibility.
Choose the task before choosing the kit
| Selection | Configuration request | Confirm before ordering |
|---|---|---|
| RMP-TOOL | Residue cleaning / new-bore machining / inspection | Specify bore drawing, thread and the actual tools needed |
| RMP-CAB | 6-pin / 8-pin / adapter harness | Verify both contact maps, supply, shield path and temperature |
| RMP-PLUG | Blanking bolt / reviewed temperature element | Confirm seat, insertion, pressure boundary and exact component purpose |
Use the instrument and machine manuals. A spacer, adapter, plug or tool must not alter an installation without approved geometry and pressure-boundary review.
Choose your RMP configuration
Mounting-Hole Cleaning & Machining Tool Kits
Maintaining and inspecting model-specific mounting bores
- Output
- Mechanical maintenance tooling
- Arrangement
- Cleaning tools / machining tools / inspection plug
Shielded Melt Pressure Cables & Connector Adapters
Matching the probe connector to the installed indicator or PLC
- Output
- 6-pin / 8-pin or specified interface
- Arrangement
- 5 m / 10 m cables and reviewed adapter harnesses
Mounting-Hole Blanking Bolts & Temperature Accessories
Unused-port closure and reviewed melt-temperature measurement
- Output
- Blanking hardware or separate melt-temperature element
- Arrangement
- Approved seat, tip length and probe / bolt arrangement
Specify this family
MATCH THE PROBE TO THE PROCESS
Send the model. Confirm the details.
Share the existing part number, mounting bore and controls interface for a configuration-specific quotation.