4–20 mA & 0–10 V Melt Pressure Transmitters

Conditioned outputs for PLC analog input channels on extrusion, compounding and recycling lines. Select a current loop or voltage input that matches the installed controls.

Confirm before ordering

Specify 2-wire 4–20 mA or the required 3/4-wire voltage circuit and supply.
Review loop resistance, cable shielding and VFD grounding against the model manual.
HART and CANopen are engineering requests; protocol support must be confirmed.

Pressure & mounting choices

Specify full scale in PSI or bar: 1,500 PSI ≈ 103.4 bar; 3,000 PSI ≈ 206.8 bar; 5,000 PSI ≈ 344.7 bar; 10,000 PSI ≈ 689.5 bar. Nominal 100 / 200 / 350 / 700 bar ranges are separate specifications.

Review 1/2″–20 UNF, M14 × 1.5, M18 × 1.5 or M22 × 1.5 against the full bore drawing. The thread alone does not define compatibility.

Choose your RMP configuration

RMP-TX

4–20 mA / 0–10 V Melt Pressure Transmitter

Direct PLC analog input integration

Output: 4–20 mA or 0–10 V, configuration-specific
Arrangement: Rigid or flexible high-temperature probe

Configure this family ↗

MATCH THE PROBE TO THE PROCESS

Send the model. Confirm the details.

Share the existing part number, mounting bore and controls interface for a configuration-specific quotation.

Start your melt pressure RFQ ↗